Search
Search Result
-
Motor Mounts
Category: Products/DVS Engineered Products
... the 4.6 engine in 67-70 Mustang requires the modification of the shock towers to make clearance for the wider engine. These mounts will fit 65-6 Mustangs with modifications, but the stock suspension will ...Monday, 31 August 2009 -
IRS For Vintage Mustangs
Category: Products/DVS Engineered Products
... Normal wear items available from your local Ford dealer! Shock absorbers can be rebuilt! Latest technology - wide selection of axle ratios, brake assemblies and aftermarket parts. ...Thursday, 27 August 2009 -
Lowered Expectations
Category: Uncategorised Content
... Lowered subframe unit Special lowered shocks Optional spring rates if necessary Lowered IRS Notes: Ground Clearance - With the non-altered cradle the ride height is about 3.75 ...Monday, 14 September 2009 -
Attention 65-66 Mustang Owners
Category: Uncategorised Content
... the rear bracket and the coil over shock - just as you do with the later 67-70 installations (we note this for a reason). No clearance problems on the inside of the wheel well. Our alignment ...Monday, 14 September 2009 -
Mac Strut Update
Category: Blog/Blog
... coil over kits. Shown above is the COP-2 coil over for the single adjustable Koni shocks mounted on this 67. Depending on your strut choice, Maximum probably has a conversion for it. 99-04 Caster Camber ...Wednesday, 14 May 2008 -
Canton Front Sump Oil Pans Are Here!
Category: Blog/Blog
... sump pickup tubes Note: To use the Canton front sump pan in a typical 67-70 Mustang Application, you will need to cut the shock towers of your car back to fit the late model motor. See how to do ...Tuesday, 28 February 2006
