Search
Search Result
-
Motor Mounts
Category: Products/DVS Engineered Products
... Heavy 7 gauge construction. Precision laser cut, not stamped. Epoxy powder coating (semi black finish). Grade 5 hardware. Made in the USA. Motor Mounts P/N MM01 - $149 Note: Installing ...Monday, 31 August 2009 -
IRS For Vintage Mustangs
Category: Products/DVS Engineered Products
... shocks for the ultimate in performance. NOTE: IRS unit is not included in the kit price. This kit fits the 1999-2003 Mustang Cobra IRS unit and will not work with the T-Bird unit. Optional Equipment ...Thursday, 27 August 2009 -
IRS Subframe Cradle Drop
Category: Uncategorised Content
... and keep everything at the correct angles. Rear of the cradle. Note the higher angle of the rear of the cradle - it's approx 3 1/2 inches higher in the back. Use ...Wednesday, 20 January 2010 -
Lowered Expectations
Category: Uncategorised Content
... Lowered subframe unit Special lowered shocks Optional spring rates if necessary Lowered IRS Notes: Ground Clearance - With the non-altered cradle the ride height is about 3.75 ...Monday, 14 September 2009 -
Attention 65-66 Mustang Owners
Category: Uncategorised Content
... floorpan of a 70 Mustang. Note no rib! Looking to the inside of the wheel well, there is plenty of space with the early cars. There is about an inch to go before you start having clearance problems with ...Monday, 14 September 2009 -
IRS Facts, Fiction, and Useless (and Useful) Trivia
Category: Uncategorised Content
... drag racing anyway. If you are road racing the car you shouldn't have a problem. Also note that in the Ford Motorsport Catalog they state that gearing higher than 3.27 can reduce the lifespan of some of ...Monday, 14 September 2009 -
Mac Strut Update
Category: Blog/Blog
... plan on offering the Maximum parts along with the kits when the kits are finalized. Stay tuned! 03-04 Cobra install Notes 03 Crate engine installation A couple of notes on installing ...Wednesday, 14 May 2008 -
Canton Front Sump Oil Pans Are Here!
Category: Blog/Blog
... sump pickup tubes Note: To use the Canton front sump pan in a typical 67-70 Mustang Application, you will need to cut the shock towers of your car back to fit the late model motor. See how to do ...Tuesday, 28 February 2006 -
Products
Category: Section
DVS Restorations is developing commercial version of all the custom built products needed to install late model components into the early Mustang chassis. DEALER'S NOTE - if you are interested in dealer ...
