Search
Search Result
-
Monday Update 1/18/10
Category: Blog/Blog
... Boss has been modified with a wireless remote trunk release, we decided to mount the Alpine rear camera in the keyhole with a custom camera mount built by RB Machine. This allows us to have the camera ...Tuesday, 19 January 2010 -
Motor Mounts
Category: Products/DVS Engineered Products
These motor to frame mounts are designed especially to mount a 4.6 Ford modular motor into the 67-70 Mustang chassis using the original style front suspension. These bolt in to the existing mount ...Monday, 31 August 2009 -
IRS For Vintage Mustangs
Category: Products/DVS Engineered Products
... Base Kit - $1699 Includes the following: Complet bracket kit to mount IRS unit. Bracket kits are manufactured in the USA and include the following features: Precision laser cutting ...Thursday, 27 August 2009 -
IRS Subframe Cradle Drop
Category: Uncategorised Content
... removing 2 inches from the rear mounting arms and rotating and relocating the front mount points to match. This is best done in a fixture that holds the cradle in the right angle. After the cradle is cut ...Wednesday, 20 January 2010 -
Lowered Expectations
Category: Uncategorised Content
... taller 255/50-17 tires Dave Stribling Restorations has developed a special jig that allows the removal of about 2 inches of material from the IRS subframe - and keeps the mount points in the ...Monday, 14 September 2009 -
Attention 65-66 Mustang Owners
Category: Uncategorised Content
... amounts of tire under this car with the new flares, our first goal was to see if our kit will physically bolt into the 65-6 chassis. Answer - YES! The frame rails and position in the rear of the chassis ...Monday, 14 September 2009 -
IRS Facts, Fiction, and Useless (and Useful) Trivia
Category: Uncategorised Content
Q. - So what's the difference in the 99, 2000 R, 2001-2 and 2003-2004 Units? A. - Here's what we know so far: 1999 - small 28 spline axles, 3.27 gear, posi center, soft rubber in subframe mounts. ...Monday, 14 September 2009 -
Mac Strut Update
Category: Blog/Blog
... coil over kits. Shown above is the COP-2 coil over for the single adjustable Koni shocks mounted on this 67. Depending on your strut choice, Maximum probably has a conversion for it. 99-04 Caster Camber ...Wednesday, 14 May 2008 -
Canton Front Sump Oil Pans Are Here!
Category: Blog/Blog
DVS Restorations now carries the Canton front sump oil pan for 4.6 modular motors. The pan is fully baffled and comes with a provision for a dipstick tube. Mounted here on an 03 Cobra motor, the pan ...Tuesday, 28 February 2006
